EVTS-23 AC/DC Vehicle Interoperability Test System
Market price:
Keywords:
EVTS-23 AC/DC Vehicle Interoperability Test System
Product Description
I. Overview
This test system is primarily used for performance testing of new‑energy electric vehicles. It comprises an AC vehicle interoperability test system and a DC vehicle interoperability test system, enabling compliance testing according to the GB/T 34658‑2017/2025 protocol, interoperability testing in accordance with GB/T 34657.2‑2017/202X, 3C certification testing for on‑board charging as specified in GB/T 18487.1‑2015/2023, and the relevant test items outlined in GB 44263‑2024 for both AC and DC vehicle‑side interfaces (supporting Class A systems and backward compatibility with the 2015 version).
II. System Topology Diagram

III. System Technical Specification
(1) AC/DC Vehicle Interoperability Test System
(1) The system comprises an installation cabinet, an industrial PC, a data acquisition system, a centralized control system, charging modules, external data acquisition interfaces, and power supply switches, among other components.
(2) The equipment is equipped with one AC charging gun, with a cable length of 5 m. The cable specifications comply with the requirements stipulated in GB/T 20234.1-2023 and meet the testing requirements for vehicles operating at a maximum three-phase AC current of 63 A.
(3) The equipment is equipped with one DC liquid-cooled charging gun cable, 5 m in length, meeting the requirement that the main circuit conductor cross-sectional area shall be no less than 50 mm².
(4) The system is equipped with a display screen no smaller than 19 inches, capable of showing the testing process and data in real time.
(5) The equipment is equipped with DC charging pile control‑guidance functionality, enabling simulation of the entire normal charging‑pile startup process. Its communication protocol complies with the requirements of the GB/T 27930‑2023 standard and meets the test‑requirement specifications for Class A and Class C vehicle types under the GB/T 27930‑2:2024 protocol conformance framework.
(6) The equipment integrates the 2015+ (compatible with 2015) vehicle DC charging test circuit into a single unit, enabling compliance with both electric‑vehicle interoperability testing and communication‑protocol conformance testing requirements.
(7) The equipment is equipped with an AC/DC signal acquisition panel and features standard 4 mm safety‑rated test leads, enabling the measurement and monitoring of both DC lead signals (DC+, DC−, PE, S+, S−, CC1, CC2, A+, A−) and AC lead signals (L1, L2, L3, N, CC, CP, PE).
(8) The device is equipped with a high-precision current Hall sensor, capable of measuring both AC and DC currents up to a maximum range of 100 A, with a current measurement accuracy of 0.2% FS. It features two types of current signal acquisition interfaces: voltage‑type and current‑type.
(9) The equipment’s DC control pilot circuit is equipped with simulated functions for the R1, R2, and R3 control pilot resistors, with resistance values of 2 kΩ for R1, 3 kΩ for R2, and 100 Ω to 2,999 Ω for R3, thereby satisfying the upper and lower limit simulation requirements specified in GB 44263‑2024.
(10) The equipment’s DC charging circuit features a simulation function for the U1 power supply at the charging pile end, with a pull-up voltage of 12 VDC and an accuracy of 0.2% of full scale.
(11) The equipment’s DC charging circuit is equipped with switches S, S1, and various control terminals—DC+, DC−, S+, S−, CC1, CC2, A+, A−, L1, L2, L3, N, CC, CP, PE, etc.—enabling simulation of the on/off states of each circuit.
(12) The equipment is equipped with an auxiliary power supply, meeting the requirements for testing the boundary voltage of the auxiliary power supply during DC interoperability tests.
(13) Built-in insulation‑state simulation allows for simulating both symmetrical and asymmetrical insulation faults in the DC+/DC− to PE circuit. Insulation resistance ranges are 40 kΩ, 60 kΩ, 90 kΩ, 190 kΩ, 300 kΩ, 600 kΩ, and 790 kΩ, with a resistance accuracy of 1% of full scale.
(14) The device is equipped with an 8-channel, high-speed, high-precision data acquisition module capable of capturing waveform parameters for charging voltage, charging current, CC2 voltage, auxiliary power supply voltage, and other signals, with a data sampling accuracy of 0.2% of full scale.
(15) The equipment is equipped with a remote communication interface, enabling on/off control of each circuit via host‑computer software.
(16) The AC charging system is equipped with a 4-channel oscilloscope card, enabling the acquisition of voltage, current, and control‑guidance signals during AC charging, with a maximum single‑channel sampling rate of 2 MS/s.
(17) The equipment’s DC charging system is equipped with a built-in 20 kW DC charging module, featuring a voltage output range of 200–1000 V, a maximum current of 73 A, and a voltage output accuracy of 0.2% of full scale.
(18) The AC charging system of the equipment is equipped with connection‑confirmation resistors R1/RC/R4 and switches S1/S3. The vehicle‑side connection‑confirmation resistors RC and R4 can be remotely configured via software, and their simulated resistance values comply with the requirements specified in Table A.5 of GB/T 18487.1‑2023.
(19) The equipment’s AC charging system is equipped with a PWM pulse generator, allowing continuous adjustment of both the PWM pulse voltage and the duty cycle. It can accommodate test procedures such as CP circuit boundary voltage testing, PWM duty cycle variation testing, PWM duty cycle out-of‑range testing, and PWM frequency boundary testing.
(20) The system is powered by AC 380 V ±10%. The equipment is equipped with a 63 A circuit breaker to ensure reliable switching of the power supply, and it includes quick‑connect power cables to meet the system’s power‑supply requirements.
(21) Detailed Technical Specifications
| DC rated output power | 20KW |
| Charging voltage output range | DC 200V~1000V (constant power: 250–500V, 500–1000V) |
| Output voltage resolution | 0.01V |
| Output voltage accuracy | 0.2%F.S. |
| Current measurement range | 0~100A |
| Current resolution | 0.01A |
| Current accuracy | 0.2%F.S. |
| R1 resistance value | 2000 Ω (DC), 1000 Ω (AC) |
| R2 resistance value | 3000Ω |
| R3 Resistance Value Setting Range | 100Ω–2999Ω, with an adjustment step of 1Ω |
| R4 gear position | 1800Ω, 2700Ω, 3300Ω |
| RC gear position | 100Ω, 220Ω, 680Ω, 1.5kΩ |
| PWM duty cycle adjustment range | 0%–100%, in 1% increments |
| PWM voltage range | 10.8–13.2 V, in steps of 0.1 V |
| Control of the precision of the shunt resistor | Accuracy: 0.2% F.S., Power: 1/2 W |
| Auxiliary power supply voltage range | DC 10V~13V, accuracy 0.2% F.S. |
| Auxiliary power supply rated current | 10A, accuracy 0.2% F.S. |
| DC Data Acquisition System | 8 channels, sampling rate > 1 kHz, sampling accuracy 0.2% of full scale. |
| Data Acquisition for Communication | 4 channels, with a maximum sampling rate of 2 MS/s |
| Communication interface | CAN 2.0, RJ45, etc. |
| Operating ambient temperature | -20℃ to +50℃ |
IV. Equipment List
| Serial number | Name | Quantity | Note |
| 1 | AC/DC Vehicle Interoperability Test System | 1 unit | It includes components such as the control computer, monitor, charging module, and charging gun. |
| 2 | Testing software | 1 serving | |
| 3 | Power supply cable | 1 root | |
| 4 | Instruction manual | 1 copy | |
| 5 | Warranty card | 1 serving | |
| 6 | Certificate of Conformity | 1 serving |
5. Product Appearance Images

Online Inquiry
