ACTE-2240X AC Charging Pile Interoperability Test Platform
Market price:
Keywords:
ACTE-2240X AC Charging Pile Interoperability Test Platform
Product Description
This solution is primarily designed for interoperability testing of AC charging stations, automatically performing the interoperability test procedures specified in GB/T 34657.1-2017. Upon completion, it can generate a test report with a single click. Additionally, the test system can be connected to a programmable AC load, enabling testing of high‑power (63 A) AC charging stations.
I. Main Functions of the ACTE-2240X Test Platform
1. The device features a 6U-standard modular design and can be equipped with a portable case for convenient on-site testing; all measurement modules are built-in, ensuring ease and speed of use.
2. Complies with the requirements of GB/T 34657.1-2017, “Test Specification for Conductive Charging Interoperability of Electric Vehicles – Part 1: Power Supply Equipment,” including AC charging station interoperability tests such as connection confirmation testing, charging readiness testing, start-up and charging phase testing, normal charging completion testing, charging‑connection control sequence testing, and CC‑line disconnection testing.
3. Each of the front and rear panels is equipped with a standard 63A charging gun socket, whose pin configuration complies with the requirements specified in GB/T 20234.2-2015.
4. The device integrates a vehicle interface circuit simulation module, a high-speed, high-precision waveform acquisition module, and other components, enabling testing simply by plugging in the connector and eliminating the complexity of connecting multiple devices.
5. The equipment is equipped with on/off switches for each circuit—L1, L2, L3, N, PE, CP, and CC—as well as a CP grounding short-circuit switch, enabling simulation of faults in the vehicle’s AC charging interface circuitry.
6. Equipped with a 4 mm standard parameter acquisition interface, enabling external signal acquisition for multiple channels;
7. The device features a built-in waveform acquisition module with four-channel sampling, a sampling rate of 2 MS/s, and a 256 MB buffer, ensuring zero data loss during prolonged continuous data acquisition.
8. The equipment can simulate the AC charging control and guidance circuit of electric vehicles, featuring equivalent resistance simulation for R2 and R3. Specifically, R2 has an adjustable range of 100 Ω to 2,999 Ω, with continuous adjustment in 1-Ω steps and a resistance accuracy of 0.2%. R3 offers an adjustable range of 1,000 Ω to 5,000 Ω, also with continuous adjustment: 1,000 Ω to 3,000 Ω in 1-Ω steps, and 3,000 Ω to 5,000 Ω in 500-Ω steps, with a resistance accuracy of 0.2% of full scale (FS).
9. The equipment can simulate both vehicle states: one with S2 and one without S2.
10. The equipment features an automated testing function for interoperability verification, following the established test procedure; upon completion, it automatically generates a test report, with results presented clearly at a glance.
11. The equipment features a built-in load module, with the load utilizing advanced power‑dissipation components that deliver high power density and eliminate red‑hot conditions. All heating elements comply with UL safety standards. The load employs constant‑resistance loading, with a rated voltage of AC 230 V and an adjustable current range of 1–40 A.
12. The equipment is equipped with a load expansion interface, enabling load capacity expansion to meet the testing requirements of AC charging piles up to 63 A per phase.
13. The enclosure is made of 1.5 mm aluminum, featuring a compact size and lightweight design, with a total weight not exceeding 20 kg.
14. The test software features a test‑item selection interface, enabling both single‑item automated testing and continuous full‑project automated testing. Upon completion, it automatically saves the test data and generates a test report.
II. Technical Specifications of the ACTE-2240X Test Platform
| Specification and Model | AC Charging Pile Interoperability Test Equipment ACTE-2240X |
| Voltage measurement range | AC 0-480V |
| Current measurement range | 0-70A |
| High-speed, high-precision waveform acquisition module | Four-channel acquisition, with a sampling rate of 1 MS/s and a 256 MB buffer. |
| R2 equivalent resistance adjustment range | 100 Ω to 2999 Ω, with a step size of 1 Ω and a resistance accuracy of 0.2% |
| R3 Equivalent Resistance Adjustment Range | 1000 Ω to 5000 Ω, with a step size of 1 Ω and a resistance accuracy of 0.2% |
| Current measurement accuracy | ±0.2% |
| Voltage measurement accuracy | ±0.2% |
| External Expansion Load Interface | 63A |
| Withstand Voltage Insulation | Above 1000V |
| Cooling method | Forced-air cooling type |
| Power supply | AC 220V ±15%, 50 Hz |
| Mean Time Between Failures | MTBF≥51000 H |
| Operating ambient temperature | -20℃ ~ +50℃ |
| Dimensions and Weight | Size 483* 480* 264 mm, weight 20 kg |
IV. Schematic Diagram of the ACTE-2240X Test System

V. ACTE-2240X Test Platform Configuration List
| Serial number | Name | Quantity | Note |
| 1 | Interoperability Test Equipment for AC Charging Piles | 1 unit | ACTE-2240X |
| 2 | Interoperability Testing Software for AC Charging Piles | 1 set | Meet interoperability testing requirements |
| 3 | Laptop (optional) | 1 unit | |
| 4 | UT890 | 1 piece | Host Communication Control |
| 5 | 485 cable | 1 root | Host Communication Control |
| 6 | USB communication cable | 1 root | Waveform acquisition module communication with the industrial PC |
| 7 | Power cord | 1 root | |
| 8 | Load connection cable | 1 set | Connect external expansion loads |
VI. Application Cases
Beijing Qunling Energy specializes in building new‑energy testing platforms, providing tailored solutions for metrology institutes, quality inspection agencies, electric power research institutes, third‑party laboratories, and manufacturers of charging piles (stations) and new‑energy vehicles. Our platforms enable comprehensive testing of electric vehicle charging stations and piles, covering electrical performance, metrological verification, safety compliance, interoperability, protocol conformance, and more. Offering both laboratory‑based and on‑site testing capabilities, we support type tests, acceptance inspections, grid‑connection assessments, operational maintenance evaluations, and routine annual checks. For detailed technical specifications, please contact Qunling.
Beijing Qunling’s new‑energy testing products have been successfully deployed at dozens of third‑party testing institutions, including the State Grid Electric Power Research Institute, the China Electric Power Research Institute, the State Grid Electric Vehicle Service Company, KAIPO Testing, the Shanghai Institute of Electrical Science, the Shenzhen Institute of Metrology, the Southern Power Grid Electric Power Research Institute, the Beijing Electric Power Research Institute, the Jiangsu Electric Power Research Institute, the Guangdong Quality Inspection Institute, the Shandong Quality Inspection Institute, the Suzhou Quality Inspection Institute, the China Automotive Technology Research Center, the Chongqing Vehicle Inspection Research Institute, and the Changchun Automotive Materials Center. In addition, hundreds of new‑energy vehicle and charging‑station manufacturers—including NIO, BMW, Tesla, NARI, TELD, Pinggao Electric, and Zhuiri—have also purchased Qunling’s testing equipment.


VII. Reference Standards
GB/T 18487.1-2015 Electric Vehicle Conductive Charging System — Part 1: General Requirements
GB/T 20234.1-2015 Couplers for Conductive Charging of Electric Vehicles — Part 1: General Requirements
GB/T 20234.2-2015 Conductive Charging Connector for Electric Vehicles — Part 2: AC Charging Interface
GB/T 20234.3-2015 Couplers for Conductive Charging of Electric Vehicles — Part 3: DC Charging Interface
GB/T 27930-2011 Communication Protocol Between Off-board Conductive Chargers and Battery Management Systems for Electric Vehicles
GB/T 34657.2-2017 Electric Vehicle Conductive Charging Interoperability Test Specification – Part 2: Vehicle
GB/T 34658-2017 Conformity Test for the Communication Protocol Between Off-board Conductive Chargers and Battery Management Systems for Electric Vehicles
GB/T 50150-2006 Standard for Handover Tests of Electrical Equipment in Electrical Installation Projects
Online Inquiry
