SBCT Series Single-Cell Battery Activator
Market price:
Keywords:
SBCT Series Single-Cell Battery Activator
Product Description
Since the capacity of a battery pack is determined by the lowest‑capacity individual cell, once we have identified the lagging cell, it is essential to accurately measure its capacity and, during subsequent maintenance, to monitor it closely to track its performance trend. Traditional methods that involve deep discharging the entire pack are labor‑intensive and impractical for frequent use; moreover, under normal operating conditions, deep discharges should be avoided. Therefore, we can employ SBCT to conduct an online capacity test on the specific lagging cell, thereby precisely determining its capacity.
When we identify a lagging cell within a battery pack, the conventional approach is to perform equalization charging on the entire pack. However, practice has shown that this method not only fails to restore the lagging cell but can also lead to water loss in other cells due to overcharging. Therefore, we can employ SBCT to subject the lagging cell to repeated online charge–discharge cycles, thereby reactivating its deactivated active materials and achieving the goal of activation and remediation.
Main Features
1. It supports “online” testing without disrupting system operation and integrates three functions: single-cell charging, discharging, and activation.
2. It can accurately measure the actual capacity of lagging individual battery cells.
3. A rechargeable battery that can be repeatedly charged and discharged, which activates the battery by revitalizing the deactivated active materials on the battery plates.
4. Function Settings
A. It can be configured for discharge, charge, activation, or parallel operation.
B. During operation, voltage, current, battery temperature, and mains‑power‑abnormality alarm thresholds can be set to safeguard both the battery and the unit itself.
5. Discharge termination conditions: The discharge process can be terminated by setting the cut-off voltage, discharge time, or discharge capacity, and the input range can be limited to prevent over-discharge.
6. Charging completion criteria: The charging process can be terminated by setting a target voltage‑time, a total charging time, or a specific charge capacity, and the input range can be limited to prevent over‑discharge.
7. Activation Process: The charge/discharge current, fast‑charge current, voltage, and number of cycles can be set.
8. Equipped with data analysis and printing software, it can analyze and print charge–discharge curves and calculate charge–discharge capacities, while automatically generating test reports.
Main function
First, when a battery cell has insufficient capacity, it can be charged individually to increase that cell’s capacity; this process achieves 100% efficiency.
1. When a single cell’s voltage lags behind, if the entire battery pack is charged at a uniform charging voltage, that cell’s capacity can be improved; however, this overcharges the other cells, significantly shortening their service life.
2. After use, battery packs often exhibit uneven cell voltages, which can result from inconsistent self-discharge rates or loosely tightened terminals during installation. Currently, the most effective method for addressing underperforming cells is to perform individual cell charging using a dedicated charger or the SBCT-2612 device.
Second, when a battery malfunctions, it is used to activate individual cells, with an efficiency of 50%.
Electrolyte drying, sulfation, and plate deformation are all ineffective. If a battery remains in a float‑charge state for an extended period, causing the active materials inside to solidify, the SBCT activation function can effectively restore its capacity.
Technical Specifications Table
| Characteristics | SBCT-1253 | SBCT-2453 | SBCT3030 | SBCT-2612 |
| Model number | SBCT-1253 | SBCT-2453 | SBCT3030 | SBCT-2612 |
| Suitable battery specifications | 12V | 12V, 24V | 2V | 2V, 6V, 12V |
| Charging current | 30A | 30A | 300A | 100A |
| Charging voltage | 12~15V | 12~28V | 1.750~2.800V | 1~16V |
| Discharge current | 50A | 50A | 300A | 100A |
| Discharge termination voltage | 9.6~12V | 9.6~24V | 1~3V | 0~16V |
| Power supply | — | — | AC220V/50Hz | — |
| Cooling method | — | — | Air-cooled | — |
| Display mode | — | — | Chinese–English display interface, 12.8×64 backlit LCD | — |
| Weight | 10kg | 10kg | 12.5kg | 15kg |
Online Inquiry
