Ultra-quiet generator set products (10–60 kW series)

The ultra-silent generator set is an internal‑combustion power unit that uses a diesel engine to drive a generator. It features specialized designs for noise reduction, heat dissipation, and high‑altitude operation, delivering 400 V/230 V at 50 Hz. It can be used either as a mobile unit on vehicles or installed permanently at fixed locations. In addition to its advantages—stable and reliable performance, excellent power quality, strong environmental adaptability, and a high degree of standardization and versatility—the ultra-silent generator set further enhances its quiet operation and reduced infrared radiation by effectively shielding and isolating the noise and heat sources of both the diesel engine and the generator. This ultra-silent generator set meets contemporary environmental protection standards and addresses public health concerns.

Market price:

Keywords:

Ultra-quiet generator set products (10–60 kW series)

Product Inquiry:

Manager Zhang: 13911579975@139.com

Product Description

  I. Product Overview

  The ultra-quiet generator set is an internal-combustion power unit that uses a diesel engine to drive a generator. It features specialized noise‑reduction, cooling, and high‑altitude operation designs, delivering 400 V/230 V at 50 Hz. It can be used either as a mobile, vehicle‑mounted system or as a stationary unit in fixed locations.

  Ultra-quiet generator sets not only offer advantages such as stable and reliable operation, high‑quality power output, strong environmental adaptability, and a high degree of standardization and modularity, but also achieve exceptionally low noise levels and minimal infrared radiation through further effective shielding, isolation, and attenuation of noise and heat sources from the diesel engine and generator.

  Ultra-quiet generator sets meet contemporary environmental protection standards and address public health needs.

Front and back photos of the unit (images are for modular demonstration purposes only)

  II. Main Functions

  2.1 Noise Reduction Effectiveness

  For a standard silent generator set, the average noise level (sound pressure level) at a distance of 1 meter ranges from 83 dB(A) to 97 dB(A).

  Ultra-quiet generator set: at a distance of 1 meter, the average noise level (sound pressure level) does not exceed 70 dB(A); at 7 meters, the noise level does not exceed 55 dB(A).

Figure 2-1 Average Noise Spectrum of the Generator

 

  2.2 Electrical Power Supply

  Provides 230V/400V, 50Hz single-phase/three-phase AC power.

Figure 2-2 Schematic diagram of three-phase AC electrical power

 

  2.3 Three-Remote Control and Digital Display

  It features “three‑remote” functions—remote control, remote measurement, and remote signaling—and can be networked with a host computer or a centralized monitoring system.

  The digital display unit shows the operating status, output parameters, faults, and protection alarms.

Figure 2-3-1 Controller Interface Diagram

Figure 2-3-2: Layout Diagram of the Control Box

 

  2.4 Emergency Stop Function

  The unit is equipped with an emergency shutdown function, enabling it to be shut down immediately in the event of an emergency during operation.

Figure 2-4-1: Emergency Stop Button on the Output Board Figure 2-4-2: Emergency Stop Button on the Remote Control Board

 

  III. Product Advantages

  3.1 Strong heat and cold resistance

  Heat Resistance: Featuring a heavy-duty water tank, a high‑flow cooling fan, an optimized airflow design, and intelligent thermal management, this power station delivers robust performance even in high‑temperature environments.

  Cold‑weather performance: Equipped with a dedicated fuel‑fired boiler–water‑circulation heating system, the unit exhibits excellent low‑temperature adaptability and can start reliably at –40°C.

Figure 3-1-1 Heavy-duty water tank Figure 3-1-2 High-flow cooling fan

 

  3.2 Multi-layer sound insulation and effective exhaust noise reduction

  Large-capacity impedance‑composite and semi‑water‑cooled exhaust silencers, along with multilayer sound insulation using materials of varying acoustic properties.

  The unit delivers excellent noise reduction, with ultra-low noise levels: 55 dB at 7 meters, 61 dB at 3 meters, and 70 dB at 1 meter.

 

  3.3 Fully Enclosed Structure

  The fully enclosed housing design provides protection against rain, dust, wind, and weak electromagnetic and infrared radiation, enabling the unit to operate in all weather conditions.

 

  3.4 Durable, lightweight, and easy to carry

  Diesel engines offer ample reserve power, strong high-altitude performance, and low fuel consumption, delivering excellent economic efficiency.

  Extra-large service doors and drawer-type integrated control units, featuring a modular, versatile, and standardized design that facilitates manufacturing, operation, maintenance, and after-sales support.

  With its compact cabinet design, the power station is lightweight and space‑efficient, offering excellent vibration isolation. It is ideal for vehicle‑mounted, mobile applications, and its base is equipped with forklift slots and lifting holes for easy handling and transport.

Figure 3-4-1: Front and Rear Maintenance Doors of the Ultra-Quiet Power Station Figure 3-4-2: Schematic Diagram of the Forklift Slot Lifting Hole

 

  3.5 Multi-source Intelligent Complementarity

  It can operate as an independent power source or be integrated into a smart grid alongside energy storage batteries, photovoltaic panels, and other types of power sources, enabling clean, efficient, multi‑mode complementary power supply with automatic switching and parallel operation for increased output.

 

  IV. Application Scenarios for Ultra-Quiet Power Stations

  Primary power source, emergency backup power source, and self‑generated power for field operations, remote areas, etc., particularly when integrated into a grid with other types of power sources.

  Emergency backup power supplies take over the electrical supply during power outages or other emergencies, ensuring uninterrupted power to critical equipment.

  Vehicle-mounted portable power supply—power for field operations, emergency response, and repair work.

  Fire‑fighting power supply: In situations such as a fire when the municipal power is cut off, the power station can also serve as the power source for fire‑fighting equipment.

 

  V. Main Product Specifications

Project

Technical Specifications

Rated Power (kW)

10

20

30

50

60

Power supply system

Single-phase two-wire

Three-phase four-wire

Three-phase four-wire

Three-phase four-wire

Three-phase four-wire

Rated Voltage (V)

230

400/230

400/230

400/230

400/230

Rated frequency (Hz)

50

50

50

50

50

Voltage regulation method

Inverter voltage regulation

AVR automatic voltage regulation

AVR automatic voltage regulation

AVR automatic voltage regulation

AVR automatic voltage regulation

Starting method

Electric start (12V/24V)

Electric start (12V/24V)

Electric start (12V/24V)

Electric start (12V/24V)

Electric start (12V/24V)

Fuel

Diesel fuel

Diesel fuel

Diesel fuel

Diesel fuel

Diesel fuel

Noise (dB)

55 (at a distance of 7 meters)

55 (at a distance of 7 meters)

55 (at a distance of 7 meters)

55 (at a distance of 7 meters)

55 (at a distance of 7 meters)

Intelligent Integrated Control

Manual and automatic start-up, digital display of operating status and parameters

 

Automatic monitoring, automatic fault alarm, fault display, and protection

Manual and automatic start-up, digital display of operating status and parameters

 

Automatic monitoring, automatic fault alarm, fault display, and protection

Manual and automatic start-up, digital display of operating status and parameters

 

Automatic monitoring, automatic fault alarm, fault display, and protection

Manual and automatic start-up, digital display of operating status and parameters

 

Automatic monitoring, automatic fault alarm, fault display, and protection

Manual and automatic start-up, digital display of operating status and parameters

 

Automatic monitoring, automatic fault alarm, fault display, and protection

Length × Width × Height (mm)

1100×700×850

≤1600×850×980

1700×900×1100

1800×950×1200

1900×950×1200

Mass (kg)

≤280

≤800

≤830

≤980

≤1100

Work environment

Temperature (‑40℃ to 55℃) Altitude (0 to 5,000 meters)

Temperature (‑40℃ to 55℃) Altitude (0 to 5,000 meters)

Temperature (‑40℃ to 55℃) Altitude (0 to 5,000 meters)

Temperature (‑40℃ to 55℃) Altitude (0 to 5,000 meters)

Temperature (‑40℃ to 55℃) Altitude (0 to 5,000 meters)

Scope of Application

Primary power supply, backup power supply, emergency power supply

Primary power supply, backup power supply, emergency power supply

Primary power supply, backup power supply, emergency power supply

Primary power supply, backup power supply, emergency power supply

Primary power supply, backup power supply, emergency power supply

Applicable Scenarios

Fixed power supply, vehicle-mounted portable power bank

Fixed power supply, vehicle-mounted portable power bank

Fixed power supply, vehicle-mounted portable power bank

Fixed power supply, vehicle-mounted portable power bank

Fixed power supply, vehicle-mounted portable power bank

 

 

120kW / 240kWh Air-Cooled Energy Storage Cabinet


This 120kW/240kWh air-cooled energy storage cabinet is designed for commercial energy storage scenarios. It supports PV and energy storage hybrid connection, adopting backpack structure for flexible deployment. With 0.5C charging rate and intelligent air cooling system, it connects with EMS and BMS for precise management. Featuring high energy density, long service life and multi-layer safety protection, it helps users reduce electricity cost and improve energy utilization efficiency.

120kW/209kWh Liquid-cooled PV Energy Storage System


This 120kW/209kWh liquid-cooled PV energy storage system is a commercial integrated energy storage solution. It supports PV and energy storage hybrid connection and adopts a backpack structure for flexible deployment. Equipped with high-efficiency silent liquid cooling technology and 0.5C charge rate, it can connect with EMS and BMS. It delivers high energy density, long cycle life and comprehensive multi-safety protection, stable and durable for commercial photovoltaic energy storage scenarios.

120kW/261kWh Liquid-cooled PV Energy Storage System


This 120kW/261kWh liquid-cooled PV energy storage system is a commercial integrated energy storage product. It supports PV and energy storage hybrid access, adopts backpack structure for flexible installation. With 0.5C charge rate and high-efficiency silent liquid cooling design, it can be connected with EMS and BMS. It features visual management, multiple working modes, high energy density, long service life and multi-safety protection, suitable for commercial photovoltaic energy storage scenarios.

50kW/100kWh Air-cooled PV Energy Storage System


This 50kW/100kWh air-cooled PV energy storage system is a compact commercial energy storage solution. It supports PV and energy storage hybrid connection, and adopts backpack structure for flexible on-site installation. With 0.5C charging rate and intelligent high-efficiency air cooling, it can dock with EMS and BMS. It has high energy density, long cycle life and multi-level safety protection, safe and durable for small commercial and industrial photovoltaic energy storage scenarios.

Balcony Energy Storage System PV HUB


This balcony energy storage PV HUB is designed for residential balcony solar storage scenarios. It features quick installation, space-saving ultra-thin structure and multiple safety protection functions. It is highly compatible and adaptable to other micro-inverters, supports smart energy management and continuously adjustable on-grid power for flexible application.

2kWh Stackable All-In-One Storage


This stackable all-in-one residential energy storage system integrates a hybrid inverter inside, supporting both on-grid and off-grid operation. It leverages dynamic electricity pricing to maximize economic returns, equipped with anti-flux function for self-consumption optimization. Adopting an all-in-one compact design with stackable battery modules, it features faster installation and flexible capacity expansion, with optional 1600W/2400W power modules and APP remote monitoring.

5kWh Stackable All-In-One Storage


This 5kWh stackable all-in-one energy storage system adopts modular stacking design, equipped with high-capacity battery cells that support over 10,000 charge-discharge cycles. It achieves fast switching between on-grid and off-grid to guarantee uninterrupted power supply for critical loads. With multi-layer safety protection, AI intelligent control and multiple working modes, it also supports low-temperature self-heating for cold regions. The integrated structure enables quick installation and minimalist appearance.

AC-coupled Energy Storage System


This AC-coupled energy storage system adopts charge/counterflow integrated bidirectional conversion design. It supports micro-inverter AC input and anti-flow function for self-consumption. Equipped with AI intelligent control and low-temperature self-heating function, it features integrated structure for fast installation and allows multiple units in parallel, delivering flexible and economical energy storage solutions for households.

Residential Energy Storage System 3.6~6kW/16kWh


This 3.6~6kW/16kWh residential energy storage system is equipped with high-capacity battery cells supporting over 10,000 charge-discharge cycles. It features fast on-grid/off-grid switching to supply continuous power for critical loads. Adopting multi-layer safety protection, AI intelligent management and multiple operation modes, it also integrates low-temperature self-heating for cold climate scenarios. The all-in-one design enables rapid installation with minimalist appearance.

Low-voltage Energy Storage Battery


This low-voltage energy storage battery adopts ultra-thin wall-mounted design for simple installation and maintenance. With multi-protection structure and ultra-low degradation long-life cells, it supports modular parallel connection (up to 15 units). It comes with intelligent BMS management and one-click remote upgrade, and cloud monitoring function is available, delivering reliable low-voltage energy storage solution for residential solar systems.

15–30kW PV Energy Storage Hybrid Inverter


This 15–30kW three-phase hybrid energy storage inverter supports PV and energy storage hybrid access. It adopts three-phase four-leg topology and can carry 100% unbalanced loads. It supports customized EMS and BMS control strategies, with a wide battery voltage range of 160–800V. Parallel operation is available to meet flexible capacity expansion needs for commercial energy storage projects.

40–50kW PV Energy Storage Hybrid Inverter


This 40–50kW three-phase hybrid energy storage inverter supports PV and energy storage hybrid connection. It adopts three-phase four-leg topology to carry 100% unbalanced loads. It supports customized EMS and BMS control strategies, equipped with a wide 160–800V battery voltage range. Parallel expandable design is available to satisfy capacity expansion demands for commercial solar-storage projects.

Online Inquiry

* Note: Please ensure that all information is accurately provided and keep your contact details up to date. We will get in touch with you as soon as possible.
Action
Submit Inquiry